Bubble Level

Place your phone on a surface, or hold its edge against something, to see how many degrees it tilts left–right and front–back. It works in your phone's browser with no app to install: on iPhone, tap “Start measuring” and allow motion access. The bubble turns yellow when it is within 0.5° of level.

On iPhone, tap “Allow” when asked for motion and orientation access.

0.0°

 

Left–right
0.0°
Front–back
0.0°
Slope
0.0%

  • Phone sensors are accurate to roughly ±0.5–1°. Use a proper spirit level for construction or installation work that requires precision.
  • Sensor readings are used only inside your browser and are never sent anywhere. Your zero calibration is saved only in this browser.

About this tool

A free bubble level (spirit level) that uses your smartphone's tilt sensor to show how much a surface or edge is tilted, to 0.1°. There is no app to install: just open this page in your phone's browser on iPhone or Android. Switch between a round vial for flat surfaces and bar vials for edges; the bubble turns yellow and the phone vibrates (where supported) within 0.5° of level. It also offers zero calibration, a hold button and slope in percent, and sensor data never leaves your device.

How to use

  1. Open this page on your smartphone and tap “Start measuring” (on iPhone, allow motion and orientation access).
  2. Choose “Round” for flat surfaces or “Bar” for edges, then lay the phone down or hold its long edge against the object.
  3. Adjust while watching the bubble and the angle. Below 0.5°, the bubble turns yellow and “Level” appears.
  4. If the camera bump tilts your phone, place it on a known flat surface and tap “Set zero” (tap “Clear zero” to undo).
  5. Tap “Hold” to freeze the reading in awkward spots, or use the full-screen button for a larger view.

Useful for

  • Checking that furniture, shelves or a TV stand are level
  • Hanging picture frames, posters or curtain rails straight
  • Measuring the tilt or slope of boards and tables for DIY projects
  • Leveling a washing machine, fridge or camera tripod
  • Getting a quick reading when you do not have a spirit level at hand

FAQ

Can I use a bubble level without installing an app?

Yes. Open this page in your phone's browser (Safari, Chrome and others) — no app or sign-up is needed. On iPhone, tap “Start measuring” first and allow motion and orientation access.

Why doesn't the angle show on my iPhone?

Make sure the page is opened over https, then tap “Start measuring” and choose “Allow”. If you tapped “Don't Allow”, quit Safari and open the page again to be asked once more.

How accurate is a phone level?

Phone sensors are typically accurate to about ±0.5–1°. The camera bump can tilt the phone, so calibrate with “Set zero” on a flat surface first. Use a proper spirit level for construction or installation work.

Does it work on a computer?

Most computers have no tilt sensor, so they cannot measure. On a computer the page shows a QR code so you can open it on your phone, and you can move the mouse over the level to see a demo.

What does slope (%) mean?

It is how much the surface rises over a horizontal distance of 100, calculated as tan(angle) × 100. For example, 1° is about 1.7%, and a 1% slope is about 0.57°.

Contact