Sound Level Meter

Sound Level Meter (Decibel Meter)

Tap “Start” and allow microphone access to see how loud it is around you, as an approximate decibel value. No app is needed: it works in the browser on smartphones and computers. Sound is never recorded or sent anywhere — the microphone is used only to calculate the level on this screen.

ReadydB(A), approximate

--dB

Max
--
Average
--
Min
--
Time
0:00
Calibration±0 dB
  • This is not a calibrated sound level meter. Phone and computer microphones differ, so treat the value as a rough guide and use a certified meter for measurements that matter (such as noise complaints or workplace checks).
  • Very quiet (below about 30 dB) and very loud (above about 100 dB) sounds may fall outside what the microphone can measure.
  • For a steadier reading, keep the phone still with the microphone (usually at the bottom) facing the sound and avoid touching or covering it.

About this tool

A free sound level meter that uses your phone or computer microphone to show how loud it is around you as an approximate decibel (dB) value. There is no app to install: open this page in your browser and tap “Start”. Levels are A-weighted to match how people hear, and you get a needle meter, max, average and min, a 60-second graph and everyday examples such as a library (40 dB) or normal conversation (60 dB). Sound is never recorded or sent — the level is calculated in your browser.

How to use

  1. Open this page and tap “Start”, then allow microphone access.
  2. Point the microphone (usually at the bottom of a phone) toward the sound and keep it uncovered.
  3. Read the current level on the needle and the number, and compare it with the typical sound levels. Max, average, min and the graph update automatically.
  4. If the value differs from a sound level meter you trust, adjust it 1 dB at a time with the “Calibration” − and + buttons (saved in this browser).
  5. Tap “Stop” to turn off the microphone, or “Reset” to clear the readings.

Useful for

  • Getting a rough idea of footsteps, neighbors or household noise
  • Checking how loud a shop, office or classroom is
  • Checking the volume of instrument practice or karaoke
  • Comparing the noise of air conditioners and appliances
  • Checking how quiet your bedroom is

FAQ

Can I measure decibels with my phone without an app?

Yes. Open this page in your phone's browser — no app or sign-up is needed. Tap “Start” and allow microphone access.

How accurate is a phone decibel meter?

This is not a calibrated meter, and microphones differ between models, so readings can be off by several dB or more. Treat them as a rough guide, use a certified meter when accuracy matters, or match a meter you trust with “Calibration”.

Is the sound recorded or sent anywhere?

No. The microphone is used only inside your browser to calculate the level. Nothing is recorded, saved or uploaded, and the microphone turns off when you tap “Stop” or leave the page.

Why can't I use the microphone?

Make sure the page is opened over https and that the microphone is allowed in your browser's site settings. Another app using the microphone, such as a call, can also block it.

What is dB(A)?

It is a sound level adjusted to how people hear — we perceive low and very high frequencies as quieter. Most sound level meters use this A-weighting.

Contact